Dish Network BASIC REMOTE Guide de l'utilisateur télécharger pdf (Page 19)

18 118866

6. Write the number in step 2 from page 15 into the

blankinstep10below.

7. Press and hold the until both lights

turn on (it takes about five seconds).

8. Release and light will flash.

9. Press the

RECALL button.

10.Enter 0- .

11.Press the

MUTE button while watching light.

12.If the light flashes three times, go to

step 13. If light does not flash, go to step 7

and try again.

13.Press . Make sure your VCR tunes to the

channelinstep10.

14.Press the

MENU button. If you see the satellite

receiver

Menu screen, go to step 26. If not, go to

step 15.

15.Answer the questions in the Table 2. The

information you provide is what you will use to

teach your remote control to change the channel on

your VCR correctly.

SAT

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

Pas de commentaire

Dish Network BASIC REMOTE Guide de l'utilisateur Page 19